Those working in the Middle East should be aware of ‘decennial liability’, which makes you liable for problems with a building for up to a decade after completion

Sheena Sood

Consultants working in the Middle East will know of the concept of “decennial liability”. It is a form of liability that does not exist in the UK and is yet another risk to add to the many challenges involved in doing business in the region. Is there anything that can be done to mitigate the risk?

Decennial liability is a common feature of the Arab civil codes and, deriving from French law, is the imposition of joint and several decennial liability on certain parties involved in the design and construction of a building or structure. In the UAE the provisions for decennial liability can be found within Articles 880-883 of the UAE Civil Code (Federal Law no 5 of 1985).

While the precise scope of decennial liability varies from country to country, in general terms contractors, architects, supervising engineers and design professionals are liable towards an employer for any total or partial collapse of a building for a period of 10 years after delivery – although in certain jurisdictions a design professional’s liability may be limited to those areas of a building or structure where it was responsible for or involved in the design.

Decennial liability imposes strict liability which may be engaged even where none of the parties were at fault – such as where collapse is due to an unforeseen ground condition

In the case of the UAE, decennial liability may potentially extend to any defect which threatens the stability or safety of a building or structure. Importantly, decennial liability imposes strict liability which may be engaged even where none of the parties were at fault – such as where collapse is due to an unforeseen ground condition.

Decennial liability is a mandatory provision of UAE law; you cannot contract out of it or limit it with a cap – such contractual provisions are void in the UAE. Effectively it is a type of contractual liability owed to the employer and a claim can only be made by the employer with whom you contract for the works. Third parties with whom you have no contractual relationship cannot rely on decennial liability unless your contract somehow (expressly or impliedly) gives such third party a right, albeit they may have some other cause of action against you in any event.

Liability commences from project handover which is normally on the issue of the taking over certificate and runs for the lesser of 10 years or the intended life cycle of the building or structure.

In the UAE no claim may be brought after three years from the occurrence of the collapse or discovery of the defect. The decennial liability provisions make no reference to when defects should have been discovered so “discovery” in this context is likely to mean actual discovery.

The employer’s remedy will be the measure of damages required to compensate them for the total/ partial collapse of the structure.

Here are some practical pointers on the subject:

  • Most professional indemnity insurance policies (being negligence based or legal liability policies) do not cover decennial liability, even though, in certain jurisdictions – notably Egypt – it is mandatory for consultants to obtain insurance cover for decennial liability. Insurance products are available but most have the building owner as beneficiary and not other parties to who you may owe duties (such as owners of adjoining property or a subsequent purchaser) so you probably still need to maintain relevant third party liability insurance.
  • Ensure that your contracts do not seek to extend decennial liability to other parties beyond the employer and do not specify a longer period than required by the UAE Civil Code (10 years).
  • Seek an indemnity from your subcontractors in respect of decennial liability claims against you arising out of failure by your subcontractor to perform contractual obligations.
  • Consider the financial viability of contractors involved on the project. In cases of joint and several liability, if the contractor were to become insolvent, then the employer would likely seek to recover full costs from the design consultant.
  • If you are a designer working in the UAE you should limit your contractual scope and duties to design only and not take on any supervision or inspection duties, at least not without adequate reward. Having said this, taking on a supervision role may allow you to identify defects in the design and monitor the workmanship of the contractor to prevent issues arising.

Finally, decennial liability should feature in your project risk assessments and you should seek advice from your lawyers and brokers on ways to help you mitigate such risks on a project by project basis.

Sheena Sood leads the construction, engineering and infrastructure department at Beale & Company Solicitors and is a registered legal consultant in Dubai

 

Topics