All the latest updates on building safety reform
Whole life carbon options with costs for a range of building types
The cost of maintaining and replacing assets is a growing priority for building owners, but how do sector and building scale influence those costs?
A series of MMC firms have gone to the wall this year and doubts persist among more traditional builders. Tom Lowe looks at the issues involved
Guidance from both RICS and the RIBA on carbon reduction from a whole-life perspective can be used together to plan for resource efficiency and minimal emissions. Simon Sturgis of Sturgis Carbon Profiling reports
In redevelopment or refurbishment, retaining elements of existing buildings offers significant environmental and financial benefits
Typical design approaches minimise energy use and then offset to reach net zero – but how reliable is offsetting in reality?
The embodied carbon of a non-domestic development can be altered to a significant degree depending on the choice of materials used in its structural system
How embodied and whole-life carbon can be reduced through simple design and specification decisions at little additional cost
Assessments show retrofit to EnerPHit level, the Passivhaus retrofit standard, can reduce whole-life carbon emissions by 40% compared to typical Part L
Improving the energy efficiency of a building may be good for the planet, but occupiers may only be prepared to foot the bill if they can directly feel the benefit. Gareth Roberts of Sturgis Carbon Profiling analyses the latest research
Some of our smallest everyday choices can have a huge impact on carbon emissions within and beyond the built environment. Juan J Lafuente and Theodore Darviris of Sturgis Carbon Profiling explore the cumulative effect of lifestyle choices on our carbon footprint
Martina Arata of Sturgis Carbon Profiling explores ways in which the hospitality industry can meet guest expectations while delivering low-carbon hotels
As the latest update to Part L is implemented, Juan J Lafuente of Sturgis Carbon Profiling reports on the findings of a two-year research programme into building performance - which suggest that improvements to airtightness standards could actually lead to higher carbon emissions in the UK
Lifecycle analysis suggests that, when it comes to transport hubs, the most energy-efficient option is not always the most obvious
Lifecycle analysis sheds light on whether retrofitting or rebuilding will best help the government to deliver its 2050 carbon reduction targets
Our series on whole-life emissions for different building types continues with three 60-year scenarios for a shopping mall
Through the careful specification of timber it is possible to reduce the whole-life carbon footprint of a school by over 15%
Using the example of a building in the City of London, Gareth Roberts of Sturgis Carbon Profiling explains how new European standards for whole-life carbon assessment can make big savings
Q: How do you work out the total cost of a house over a 100-year lifetime without spending hours poring over every single element? Stephen Kennett finds out the answer
In this quarter’s comparison of whole-life costs, David Weight of Currie & Brown digs deep into the financial pros and cons of adding a basement or half-basement to your building
What are the environmental, capital cost and lifetime cost differences between a building with a steel frame and one built using concrete? David Weight of cost consultant Currie & Brown applies the firm’s Live Options modelling system to find out
.jpg)
In the latest of our whole-life cost comparison articles, David Weight of Currie & Brown examines the crucial financial considerations when deciding the height of an office block
In this third article in our series, and as part of our PFI special, David Weight of Currie & Brown looks at the differences in lifetime costs between deep-plan, shallow-plan or courtyard-based hospital designs
In the second of our series, David Weight of Currie & Brown looks at the differences in whole-life costs between a deep-plan, air-conditioned base office building and a shallow-plan scheme that is naturally ventilated
Quantity surveyor Franklin + Andrews makes its annual appraisal of the costs of building and maintaining a standard factory in 14 European countries and finds the familiar north-south divide
The first of our quarterly articles on whole-life costs focuses on primary schools. David Weight of Currie & Brown outlines typical expenditure on a basic single-storey building, then analyses the additional capital, energy and repair and maintenance costs of a further two building types
Almost two years after its first call centre cost model, Building revisits Egg’s Pride Park, updating the whole-life costs and comparing it with a model call centre by Citex
